Moon in my room instructions

Installing batteries into Moon In My Room™

  1. Use a Phillips screwdriver to remove the battery cover
  2. Insert 4 “AA” batteries. Make sure “+” and “-” end are inserted correctly, as pointed out on the battery compartment.
  3. Replace cover.
  4. Switch first to Moon in My Room ™ in the “ON” position. NOTE: The unit will not activate without the remote control. To ensure proper functionality, use Moon in My Room ™ in a dark room.
Moon in my room instructions

Installing batteries into the remote control

  1. Use a Phillips screwdriver to remove the battery door
  2. Insert 2 “AAA” batteries. Make sure that “+” and “-” end are inserted correctly, as pointed out in the battery storage space.
  3. Replace cover.

Hanging Moon in My Room™

We only mean that Moon In My Room ™ should only be installed on a vertical wall.

  1. Hang the Moon In My Room ™ from one of the three hanging holes.
  2. Insert 2 “AAA” batteries. Make sure that the ends “+” and “-” are inserted correctly, as suggested in the battery storage space.
  3. Replace cover.

Hanging Moon in My Room™

  • Hang the Moon In My Room ™ from one of the three hanging holes.
  • Select one of the 3 mixtures holds to tilt the moon to the desired position. This directly affects the angle of the crescents.

Using Moon in My Room™

IMPORTANT

  • Before the operation, be sure to turn on / off the switch on the back of Moon In which turns My Room ™ into “ON” position.
  • For the moon to function properly, the room the lights should be off.

Auto On/Off

The moon automatically lights up in a dark room. It switches off automatically after 30 minutes in the absence of manual interaction.

Night Light

The moon in my room is sensitive to light and will only work to turn the moon off in a dark room, press the button Turn the button on / off on the remote control of the Colorful night light. Press the on / off button To rejuvenate the full moon again.

Auto Phase

Your moon in my room ™ will automatically scroll through the phases of the moon when you press the automatic phase button. The moon changes from one phase to the next every five seconds. In this mode, the moon turns off automatically after 30 minutes

Permanent On/Off using Remote Control

 Press and hold the remote control power button for 5 seconds. This turns off the moon and the automatic light sensor. Your moon will not turn on automatically in a dark room. Press and hold the button again for 5 seconds to turn the moon back on and activate the automatic light sensor function.

take me to moon lamps!

Leave a Reply

Your email address will not be published.

Open chat
1
Hello, I'm Eden :)
do you need help ?
I am here to help you :)
**Only English support**